|
>>完成项目
- 上海航天局810所委托卫星天线桁架模态及变形分析
- 湖北江钻股份公司委托钻头制造中的热力耦合时变分析
- 江苏常州戚堰机车车辆厂委托火车轮对的刚度、模态分析以及优化设计
- 上海永新彩色显像管股份有限公司委托显示器框架刚度、模态分析及优化
- 上海ABACUS路灯有限公司委托卢浦大桥路灯抗风强度设计
- 中船重工711研究所委托船用发动机热力耦合分析
- 江苏省无锡市江尖水利枢纽工程节制闸闸门三维有限元结构分析
- 江苏省南京市外秦淮河三汊河口闸闸门三维有限元动力响应分析
- 上海复合材料科技有限公司委托复合材料望远镜筒三维有限元结构分析
- 中国江苏苏州华苏塑料有限公司委托PVC贴合夹网胶布泳池结构非线性有限元分析
Projects in the following list have been/being finished by Tongmei CAE Workroom:
- Analysis of mode and deformation of satellite antenna truss with non-metallic joint, sponsored by Institute 810 of Administration of Space & Aeronautics in Shanghai. 2000.9-2002.5
- Thermal & static mechanical analysis of manufacture of drill for oil detective, sponsored by Jiangzuan CO., Hubei Province, China. 2002.9-2003.9
- Stiffness、mode analysis & CAE optimization of the locomotive wheels, sponsored by Changzhou Qiyan Locomotive Co., Jiangsu Province, China. 2003.4-2004.5
- Modal & static mechanical analysis and CAE optimization of TV frame for novel color tube, Shanghai Yongxin Co., Shanghai, China. 2002.12-2003.9
- Anti-wind intension of light for Lupu Bridge, sponsored by ABACUS Lighting Co. (American enterprise), Shanghai. 2003.9
- **FE analysis & design of high-pressure vessel for vehicle, sponsored by Jiangnan Machine Group, Hunan Province, China. 2004.3-2004.12
- Nonlinear analysis of thermal & static mechanical behavior of giant engine used in shipping vehicle, sponsored by Watercraft Institute 711, Shanghai, China. 2003.7-2003.12
- 3D FEM analysis of hydrostatic pressure and sinking of steel dam in Wuxi city, Jiangsu Province, China. 2003.9-2004.1
- 3D FEM analysis of static and seismic response of steel dam across Qinhuai River, Nanjin city, Jiangsu Province, China.2003.10-2004.3
- 3D FEM analysis and design of composite structure for telescope,sponsored by Composite science and technology Limited Co. Shanghai, China. 2003.12-2004.3
- Non-linear analysis of swimming pool structure produced by rubberized fabric, sponsored by Huasu Plastic Limited Co. (Taiwan enterprise). Jiangsu Province, China. 2004.4-2005.5
|